Enkeltfag Engelsk 5 ECTS

Metoder i mikro- og nanofabrikation

Overordnede kursusmål

The overall aim of the course is to provide you with theoretical background and hands-on experience in the most common experimental techniques used for Silicon microfabrication. You will be introduced to microfabrication methods such as photolithography, etching, thin film deposition and characterization techniques such as SEM and profilometry. This should enable you to design a fabrication process, draw a lithographic mask and safely work in the DTU Nanolab cleanroom.

See course description in English


  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version


The course has a theoretical part, a methods part and an applied part. In the theoretical part, the physics, chemistry, and technology of the fabrication processes used in modern micro- and nanofabrication is described. Some of the subjects covered are: UV Lithography, Reactive Ion Etch (RIE), Lift off, Chemical Vapor Deposition (CVD), Plasma Enhanced CVD, Physical Vapor Deposition (PVD), Silicon and Silica as substrate materials, material modification by ion-implant and doping-diffusion, annealing, bonding: anodic bonding, fusion bonding, process integration, process simulation, and characterization. The methods part consists of 5 TPTs (Tool Package Trainings) containing hands-on instructions

1. Cleanroom safety
2. Lithography
3. Mask design
4. Scanning electron microscopy (SEM)
5. Plasma etching

In the applied part of the course, the students will A) follow a guided experimental part focusing on the fabrication of a pressure sensor in the DTU Nanolab cleanroom or B) acquire specialized knowledge in a selected topic of advanced micro- or nanofabrication. In both cases, the results will be presented to the other participants at the end of the course.


Hands-on instructions, lectures, e-learning, exercises, and project work.


Minimum 3, Maksimum: 6.

Vær opmærksom på, at dette enkeltfagskursus har et minimumskrav til antal deltagere. Derudover er der begrænsning på antallet af studiepladser. Er der for få tilmeldinger oprettes kurset ikke. Er der for mange tilmeldinger, vil der blive trukket lod om pladserne. Du får besked om, om du har fået tildelt en studieplads senest 8 dage før kursusstart.

Se kurset i kursusbasen





13 uger




DTU Lyngby Campus

Kursus ID 56868
Kursustype Ph.d.

10.600,00 kr.

Vær opmærksom på dette kursus har deltager begrænsninger. Læs mere