Enkeltfag 5 ECTS

Introduktion til renrums-baseret mikrofabrikation

Overordnede kursusmål

The overall aim of the course is to provide you with theoretical background and hands-on experience in the most common experimental techniques used for Silicon microfabrication. You will be introduced to microfabrication methods such as photolithography, etching, thin film deposition and characterization techniques such as SEM and profilometry. During the course students will fabricate a working pressure sensor and characterize it in the DTU Nanolab cleanroom. This will enable you to design a fabrication process, draw a lithographic mask and work safely in the DTU Nanolab cleanroom.

See course description in English

Læringsmål

  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version
  • se engelsk version

Kursusindhold

The course has a theoretical part and an experimental part. During the experimental part the students will fabricate and characterize a working piezoresistive pressure sensor. Experimental work will cover the following topics:

• Low Pressure Chemical Vapor Deposition
• UV lithography
• Chemical wet etch
• Reactive Ion Etch
• Physical Vapor Deposition
• Lift Off
• Scanning Electron Microscopy
• Probe station based electrical device characterization

In the theoretical part, the physics, chemistry, and technology of the fabrication processes
used in modern nano fabrication is described. Subjects covered are:

• All of the above and
• Plasma Enhanced CVD
• Substrate-materials: Silicon and Silica
• Material modification: Ion-implant and doping-diffusion, annealing
• Bonding: anodic bonding, fusion bonding
• Process integration
• Process simulation

For the exam the students will present the work they have done in the cleanroom and they will present the measured data from their pressure sensors.

Undervisningsform

Hands-on instructions, lectures, e-learning, exercises, and project work.

Pladsbegrænsning

Minimum 6, Maksimum: 12.

Vær opmærksom på, at dette enkeltfagskursus har et minimumskrav til antal deltagere. Derudover er der begrænsning på antallet af studiepladser. Er der for få tilmeldinger oprettes kurset ikke. Er der for mange tilmeldinger, vil der blive trukket lod om pladserne. Du får besked om, om du har fået tildelt en studieplads senest 8 dage før kursusstart.

Se kurset i kursusbasen

Tilmelding

Sprog
Varighed

3 uger

Institut

Fysik

Sted

DTU Lyngby Campus

Nanolab
Kursus ID 10851
Kursustype Kandidat
Semesterstart Uge 1
Semester slut Uge 35
Dage Man-fre 8:00-17:00
Pris

7.500,00 kr.

Vær opmærksom på dette kursus har deltager begrænsninger. Læs mere

Tilmelding